MUSEATEX MHC
MONO HIGH CURRENT AMPLIFIER
Rated at 150 watts
into 8 Ohms, these amplifiers can deliver up to 400 watts to drive low impedance
speakers. Although it is a mono amplifier, it has two input jacks which are
connected in parallel. This permits bi-amping without the use of "Y" connectors
by using one RCA jack as an input and the other one as an output. Similarly,
there are two speaker outputs connected in parallel, to enable bi-wiring of
speakers. One of the outputs can be connected to the high and mid-frequency
inputs of speakers and the other output can be used to drive the base input.
Design Features
- Small footprint.
- Meitner Floating
Charge power supply.
- Static Fan heat
sink.
- Low feedback
design with MOS FET output devices.
- Thermal overload
protection.
- Current surge
protection.
- Capable of driving
difficult loads.
Specifications
- Frequency Response:
0.1 Hz - 65 KHz.
- Harmonic Distortion:
Less than 0.25%.
- Intermodulation
Distortion: Less than 0.25%.
- Input Impedance:
100K Ohms.
- Output Impedance:
Less than 80 mill-Ohms.
- Damping Factor:
Better than 1:100.
- Peak Output
Current: 35 Amps.
General
- Power Supply:
Internal Meitner floating charge design.
- Power Requirements:
117V or 220V - 50 or 60 Hz.
- Dimensions:
3" X 14.5" X 15.25".
- Weight: 26 LBs.
Updates are
performed on Meitner and Museatex products at our Calgary facility.
Email us at john@museatex.com or call
(403) 968-1400 for more information.
Museatex
Mono High Current Amplifier (CMHC)